Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| landcruiser_spark_plug_seal_SST.stl | Primary model | 140.7 KB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Landcruiser Spark Plug Tube Gasket Special Tool
Shared by
3DPrintedCarPartDescription
A very simple tool for replacing the spark plug tube gaskets in the 1FZ-FE engine. After removing the rocker cover and replacing the seals around the spark plug tubes, you need a device with a specific size in order to seat the replacement seals. I made this "special tool" to help with that job, in place of SST 09608-04060 which is referred to in the service manual. It worked a treat. Simply position over the tube seal edges and tap in lightly with a hammer, going evenly around the edge. Very simple, but I hope it helps someone else.
Compatible Cars
Originally published on thingiverse.com by Luke (spble) · License: CC0
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
