Files (3)

hex_gauge_Ø63.7mm_.STEP

STEP

42.0 KB

hex_gauge_Ø63.7mm_.STL

STL

14.9 KB

oil_filter_removal_tool.STL

STL

2.2 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Recommended kit

62g

Based on 25% main infill across listed model files

Material cost

$1.49

Filament only at roughly $24/kg PETG / ASA

Print time

1.8h–2.9h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
hex_gauge_Ø63.7mm_.STEP	Printable file	42.0 KB STEP	10g $0.23	11g $0.25	23g $0.56	Print the gauge first to ensure accurate sizing
hex_gauge_Ø63.7mm_.STL	Accessory piece	14.9 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.
oil_filter_removal_tool.STL	Printable file	2.2 MB STL	39g $0.94	42g $1.02	93g $2.23	Print the gauge first to ensure accurate sizing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

TOYOTA Oil Filter Removal tool

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

To suit various Toyota engine models with inserted oil filters.e.g Toyota 15620-31060 Oil Filter Cap Assembly To ensure best fit- Print the gauge to check the fit before printing the part. gauge is 14 x flats at a Ø63.7mm A/F Adjust the size in the model to suit. Each printer brand and settings combination will result in different size finished print. Models of the gauge and tool supplied, if you require any specific format or size, message please. The 3 legged oil filter tool ( pictured ) or a 1" socket/wrench.