Geoffs Toyota Yaris Taillight Spanner - image

Files (1)

Geoffs-Yaris-T10-Taillight-Spanner.stl

STL

531.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Geoffs-Yaris-T10-Taillight-Spanner.stl	Primary model	531.1 KB STL	Slice file	Slice file	Slice file	Ensure a tight fit by adjusting print settings if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Geoffs Toyota Yaris Taillight Spanner

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I just tried to remove the tail-light from a 2007 Toyota Yaris - bloody nearly impossible to do, a real PITA - so - here's my solution:- Geoffs-Yaris-T10-Taillight-Spanner.stl. It's not perfect, but it does work OK - the hardest part is getting the fingers into the (nearly impossible to see) groove on the tail-light plastic clip. Luckily, getting it back in is much easier. I made it a tight fit (you can see the slight bend in the fingers), so the light doesn't fall out on reassembly.