Files (4)

CAP.stl

STL

312.9 KB

CAP_VERSION_2.stl

STL

243.2 KB

CLIP.stl

STL

49.6 KB

LOGO.stl

STL

390.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CAP.stl	Cover / cap	312.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
CAP_VERSION_2.stl	Cover / cap	243.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
CLIP.stl	Clip	49.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
LOGO.stl	Printable file	390.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hyundai inner wheel cap

0 downloads136 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

58mm outer diameter. Actual wheel is 59 mm 51mm inner diameter (where clips start) Actual is 52mm Separate stick on logo provided 2 Versions. One with built in clips, the other with glue in more springy clips.