Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| License_Plate_Relo_Brace.stl | Primary model | 207.4 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Jeep License Plate Relo Bracket for TeraFlex Mopar HD Tire Carriers
Shared by
3DPrintedCarPartDescription
This is a quick little plate I made to move the JK license plate from the corner to the middle of the spare tire. 4mm standoff is to clear any center hub on the wheel. NOTE This is a specific mount - it is for moving your license plate from the corner to the middle of the spare tire when you have the Mopar or Teraflex HD tire carriers with the lug standoffs that support the third brake light using 2 extended studs. Not sure who else would use this, but what the hell:) More pictures once I get it mounted and wired,
Compatible Cars
Originally published on thingiverse.com by Bob P (orcusomega) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
