Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Jimny rear door lever cover

0 downloads28 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

*German below* Cover for the opening leaver for the rear door of a Suzuki Jimny FJ, with or without a oval cutout to acess the lever, in either 1,5 or 2,5 mm thickness. Remove the factory plugs from the square holes and just push the cover in place, you may have to modify the rectengular studs a tad to make it fit. The cover is interferencefit. ________________________________________________________________________ Abdeckung für den Türgriff der Hecktüre von einem Suzuki Jimny FJ, mit oder ohne ovalen Ausschnitt in 1,5mm oder 2,5mm Dicke. Einfach die Stopfen entfernen und die Abdeckung reindrücken, eventuell müssen die Pins auf der Rückseite etwas nachbearbeitet werden, das Ganze is Übermaßpassung.