Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Suzuki Vitara door handle connector
Shared by
3DPrintedCarPartDescription
This small piece of plastic that connects the door handle to the inner workings of the door mechanism is notorious for cracking on the eye side. This is a direct replacement for the stock part. To remove old part the handle hinge pin must be slid out towards the viewer as seen on the photo. The new part is printed in two mirrored halves and requires no adhesive for assembly. Both parts are placed together and slid into the slot that holds them together on the handle side. Sliding the hinge pin back locks it in place. On the eye side the plastic bushing holds both parts together.
Compatible Cars
Originally published on thingiverse.com by Matej Škvarč (mathew86) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
