Mercedes Benz 190E/W201 Handbrake Replacement Button - image

Files (1)

Cap.STL

STL

185.9 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cap.STL	Cover / cap	185.9 KB STL	46g $1.10	50g $1.20	110g $2.63	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Mercedes Benz 190E/W201 Handbrake Replacement Button

0 downloads202 views0 likes

Shared by

Michael Chen

Verified

Description

My handbrake Button Cap was damaged, so i created a replacement part. I heated it up and pressed it on the original handbrake part below the button cap. The top area of my design is slighty thicker than original to prevent breaking there.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Mercedes-Benz (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files