Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mercedes Sun Visor Clip
Shared by
3DPrintedCarPartDescription
This is a visor clips I designed and printed for my 1989 Mercedes Benz 300E. It should also fit: W123, W124, W126, W140, W201 It has no provisions to carry electricity for the vanity mirror & light. I used Carbon Reinforced PETG from 3DXTech (3DXMAX®). Print orientation is important. - The screw cover should be printed on its side. This will give it greatest strength across it's "C" opening. - The main clip should be printed on its back, assuring little or no need of supports, and facilitating load transfer from the screw cap to the screw head. The strength from the assembly comes from the screw cover. When the screw cover is inserted into place, its opening captures the visor and transfers the load into the base of the main piece.
Compatible Cars
Originally published on thingiverse.com by Robot Barnard (RobotBarnard) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
