Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 924slatchhalflengthenedwithhole_2.stl | Printable file | 2.8 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
| fixed924selsunrooflatchsolidpegrebuilt_2.stl | Printable file | 2.8 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Porsche 924 944 electric sunroof latch
Shared by
3DPrintedCarPartDescription
Update: printed, installed, works okay. I'm not a good modeler so it is what it is. i have not yet printed the final version of this but hope to in the next week. Porsche wants $170 for an assembly, you can sometimes find just this lever for $60. Highway robbery. OEM or aftermarket in the background of the picture, an early prototype in the foreground. I ran the model through makeprintable and reuploaded it. Am printing again today, will report. The second stl file, the "fixed" one is the latest. It has a solid peg as the original split one just kept breaking. Testing to follow when more parts arrive to reassemble my sunroof. Some clean up probably required; sanding the cam lobe a bit perhaps.
Compatible Cars
Originally published on thingiverse.com by Jeff Van Dyke (jvandyke) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
