Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ZoeCableHook.stl | Printable file | 271.5 KB STL | 17g $0.41 | 18g $0.44 | 40g $0.97 | Print with the hook side facing upwards for optimal strength. |
| ZoeCableHookV2_2019-10-13.stl | Printable file | 498.9 KB STL | 21g $0.51 | 23g $0.55 | 50g $1.21 | Print with the hook side facing upwards for optimal strength. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Zoe Cable Hook
Shared by
3DPrintedCarPartDescription
With this hook, you can hang the cables on your Zoe, freeing up trunk floor space and making it more easy to hang the cables back after charging. Prints on the side. When mounting it, you will probably need to bend the Zoe wall hook out a bit to mount your print on it. I used a srewdriver to help out. Check out this install video https://youtu.be/AXgzFxRexwo When hanging the cable, let the plugs rest on the floor, to avoid sounds from the cable when driving. Happy EV'ing!
Compatible Cars
Originally published on thingiverse.com by Martin Jørgensen (TTGeek) · License: CC0
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
