Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| airtopfix.STL | Primary model | 12.6 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
repair bracker for Porsche 944 Turbo air filter box
Shared by
3DPrintedCarPartDescription
The air filter box on the 944 turbo is often broken, tabs are missing and the pipe support for the intercooler pipe is often broken so I designed a new one and hot stapled it to the box. The hot stapler is a great tool and I will do some plastic soldering as well to make it look a bit nicer. The staples will be cut flush with the plastic but it is very solid as is. The metal clip that holds the pipe will hook around a small metal pin that I will drill holes fore and insert. Pop rivet pin should work.
Compatible Cars
Originally published on thingiverse.com by Anders Flodin (2bad2die) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
