Files (1)

SparkPlugSealDriver-V1.stl

STL

240.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
SparkPlugSealDriver-V1.stl	Primary model	240.3 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used if necessary for adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Spark Plug Seal Driver - Toyota

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Simple tool for driving spark plug seals into valve cover body. There is a slight recess/cavity and inner plug to hold the gasket firmly while driving it home. Is this really necessary? No, but it took less than an hour to design and print and felt a lot more elegant than finding a random pipe fitting that fit or buying a driver set. Not really much else to it, check the photos for seal part number to check the fit.