Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 18% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru WRX CS9 Club Spec Badge
Shared by
3DPrintedCarPartDescription
My son's Subaru WRX 2006 is a CS9 Club Spec version. For this, he wanted a front grill badge. Here is my 3D printed solution. The badge size was chosen as a guesstimate and is 70 x 22mm. To make the print result more interesting, I do two filament colour swaps. One to print red, the second to print silver layers. The filament colour swap is setup in your slicer software. Setting up the filament colour is easy in PrusaSlicer, other slicers probably, too. My print is made in PETG 1.75mm 3DFillies black and red, and Aurarum silver filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer. I hope you can find this print useful, too.
Compatible Cars
Originally published on thingiverse.com by Daniel Soussi (wisestone) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
