Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 18%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Subaru WRX CS9 Club Spec Badge

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

My son's Subaru WRX 2006 is a CS9 Club Spec version. For this, he wanted a front grill badge. Here is my 3D printed solution. This version has the text font in "normal" style. The badge size was chosen as a guesstimate and is 70 x 22mm. To make the print result more interesting, I do two filament colour swaps. One to print red, the second to print silver layers. The filament colour swap is setup in your slicer software. Setting up the filament colour is easy in PrusaSlicer, other slicers probably, too. My print is made in PETG 1.75mm 3DFillies black and red, and Aurarum silver filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer. I hope you can find this print useful, too.