Files (1)
Based on 30% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 30% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| wrxemblem.stl | Primary model | 88.7 KB STL | 12g $0.28 | 14g $0.33 | 28g $0.68 | Check the Thingiverse page for creator-recommended print settings. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
WRX trunk emblem
Shared by
3DPrintedCarPartDescription
infill 60. Catalog note: WRX trunk emblem is a 3D-printable car-part listing indexed for classified fitment Subaru WRX. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.
Compatible Cars
Originally published on thingiverse.com by John Mares (BreadSavage) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
