Files (1)

WRXKeyHoleLogo.stl

STL

108.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
WRXKeyHoleLogo.stl	Primary model	108.1 KB STL	Slice file	Slice file	Slice file	Ensure proper scaling to fit the 29mm x 85mm x 12mm dimensions

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

WRX Lock Badge

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This model will fit a 02-07 Subaru Impreza (WRX,STi) Trunk lock hole. This badge inserts at a 45 deg and locks into place. *Mine was printed in PLA and it started to warp over time in the elements (6 Months or so) Overall dimensions should be 29mm x 85mm x 12mm (Check scaling) Like and comment if you would like to see more! Thanks!