Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW MK7 GTi/Golf 52mm Gauge Pod Cubby Mount
Shared by
3DPrintedCarPartDescription
Easy to print, simple and minimalist 52mm gauge pod mount for the cubby of a VW MK7 GTi/Golf. It is attached using 3M two-sided tape. A hole needs to be drilled in the cubby to route the gauge wiring out. If printed in black the mount is almost invisible. Should be printed with at least PET-G but ABS would be better for heat tolerance.
Compatible Cars
Originally published on thingiverse.com by Dumbcomputers (dumbcomputers) · License: CC BY-NC-ND
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Golf III glove box hinge hooks support
License: CC BY
View & download STL files
Volkswagen VW Golf MK3 trim of steering wheel repair
Volkswagen Golf
License: CC BY
View & download STL files
VW Tiguan air vent bar
Volkswagen
License: CC BY
View & download STL files
VW Shifter Sound Isolator
Volkswagen
License: CC BY
View & download STL files
12v & USB Plugs instead of Side Ashtray VW T4
License: CC BY-SA
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
