Files (4)

j4t-bottom.STL

STL

83.1 KB

j4t-middle.STL

STL

48.5 KB

j4t-top-j4t.STL

STL

222.4 KB

j4t-top-saab.STL

STL

145.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
j4t-bottom.STL	Printable file	83.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
j4t-middle.STL	Printable file	48.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
j4t-top-j4t.STL	Printable file	222.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
j4t-top-saab.STL	Printable file	145.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Case for Just4Trionic adapter

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A case for the Just4Trionic adapter PCB. For assembly: -M2x20mm screws, 4pcs -M2 nuts, 4pcs -bottom part, 1pc -middle part, 1pc -top part, one of the two variants, 1pc.