Files (1)
Based on 100% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 100% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Saab_9-3_Shifter_Bushing.stl | Primary model | 84.5 KB STL | 12g $0.28 | 28g $0.67 | 28g $0.67 | Print at 100% infill for optimal performance |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Saab 9-3 Shifter Bushing
Description
Designed this solid shifter bushing to replace the rubber ones under the shifter. This improves the shift quality. A similar part can be purchased online for $20. Print 4 of these and pick up some washers from your local hardware store. I used a 1/4" fender washer, that seemed to be the right size. Print at 100% infill using a material that won't warp from sitting in a car. Originally designed for the Saab 9-3 & 9-5 F40 transmission. May work with F35 and F23 transmissions. Should also work in the Cobalt SS, Opel Vectra, etc.
Compatible Cars
Originally published on thingiverse.com by Jason Ve (jason14v) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
