Cone air filter holder Saab 93 NG - image

Files (2)

hus.STL

STL

369.5 KB

hus_nedre.STL

STL

823.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
hus.STL	Printable file	369.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
hus_nedre.STL	Printable file	823.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Cone air filter holder Saab 93 NG

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

UPDATE 2019-10-01 Added for the possibility to use rubber gasket/seal inbetween the two parts. Also, recalculated for 1.5mm thickness of the connecting 3" tubing. Cone air filter holder Saab 93 NG B207. Print with supports everywhere. Fits the biltema filter 32-324. Take 3" aluminium tube and fit to cold side of intake. Fix with silicone hose and clamps.