Cap.stl

STL

2.3 MB

Ring.stl

STL

998.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cap.stl	Cover / cap	2.3 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Ring.stl	Printable file	998.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

SAAB 9-3 Washer Fluid Reservoir Cap

0 downloads51 views0 likes

Shared by

Verified

Description

SAAB 9-3 Washer Fluid Reservoir Cap with Saab Logo. It needs 3 mm bolt and nut to assembly.

Published Jun 30, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Oleg Starostin (OstinStar) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.