Files (1)

MainBody_V3.STL

STL

63.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MainBody_V3.STL	Primary model	63.0 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Saab 9-3 Gear Stick Adaptor

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Gear stick adaptor for the Saab 9-3, coverted from the lift colar to select reverse to lift the whole stick mechanisum and add an aftermarket gearknob. The design will beed tweaking to fit a different gear knob as the diameter / size of the shaft will need to vary depending on the selected knob. I take no resonibility for any damage you cause when using or fitting this product.