Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CCS_Magnet_mod.stl | Printable file | 164.1 KB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to the print bed to prevent warping |
| CCS_Tesla_Magnet_mod.stl | Printable file | 201.8 KB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
CCS Cover Tesla Model 3 modified
Shared by
3DPrintedCarPartDescription
I've remixed the CCS cover with TinkerCad to - allow a little bit air flow between DC contacts and environment (see cutouts and holes) but still remaining the prevention of snow, rain..., - create holes for neodym magnets 10mmx3mm (glued with epoxy). This was my first print with PETG and so it doesn't look very nice, but it fits. STL-files: one version with text, one without Feel free to modify and enhance it.
Compatible Cars
Originally published on thingiverse.com by Lu Rhe (LuRhe) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
