SAAB Fuel Filter Cover and Underbody Nut 92152035 (A831) - image

Files (1)

saab_fuel_filter_cover_and_underbody_nut_92152035.stl

STL

615.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
saab_fuel_filter_cover_and_underbody_nut_92152035.stl	Cover / cap	615.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

SAAB Fuel Filter Cover and Underbody Nut 92152035 (A831)

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Also used on spoilers, splash guards, and side skirts. On my SAAB, this fits the 2003 9-3 Saab Convertible in various underbody places. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4go8F2PsU1E To attach, use a socket wrench and press hard to get the threads to connect. Retains well, even though the thread pitch likely does not match.