Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Saab OG 9-3 Strut top bushing

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is WIP! Currently I think this is a bit too tall. Dont want to hit a pothole and punch it through the bonnet! This is a bushing for the strut top mount of my 1999 OG Saab 9-3. This is designed to screw onto the top of the strut (M14) and slide up and down in the strut top mount, whilst removing any sideways motion that is possible with the stock mounts due to the rubber flexing.