Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Tow Hitch Cover
Shared by
3DPrintedCarPartDescription
When fitting the tow hitch in the Model 3, you have to remove the cover which leaves a big hole for lots of dirt to get in. This cover only spares the tow hitch itself and the plug for the electrical connection. Since the cover would be to big for my 3D printer, I made 2 halfs and a connector which is glued in place. Disclaimer: I do not take responsibility for this part, please use at your own risk.
Compatible Cars
Originally published on thingiverse.com by Toni Tam (Taiwantoni) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
